Model:SWTH-02013
Input:2*HDMI
Output:1*HDMI
Main Features:
HDMI 1.3 compliant
Support 1080P and 3D
No power supply required
SWTH-02013 is designed to make two HDMI sources to share on one HDMI input devices by switching the input selection.
Features
This HDMI Amplifier Auto Switcher has many features that enable it to perform in a superior manner. Among those features you will find:
1、Support 12-bit Deep Color, full 1080p
2、Support 3D display device.
3、Support HDCP
4、Multifunctional on switching : automatic or mechanical
5、Supports with HDMI1.3b.
6、High performance up to 2.5Gbps
7、Supports 15Meters HDMI Cable on both ends of the Switcher
8、Maintains high resolution video - beautiful, sharp HDTV resolutions up to 1080p, 1440p graphics and computer resolutions up to 1920 x 1200 are easily achieved.
9、Controlled by Button, no power needed.
TECHNICAL PARAMETER IN DETAIL
Signal Inputs/Output |
HDMI |
Input Video Signal |
0.5-1.0 volts p-p |
Input DDC Signal |
5 volts p-p (TTL) |
Maximum Single Link Range |
1920X1200, 1080P |
Output Video |
HDMI1.3b+HDCP1.0/1.1 DVI1.0 |
VGA |
640x480,800x600,1024x768,1920x1200 |
DTV/HDTV |
480i/576i/480p/576p/720p/1080i/1080P,3D |
HDMI Compliance |
HDMI 1.3b |
Frequency |
Up to225MHz |
Vertical Frequency Range |
60Hz |
Video Amplifier Bandwidth |
2.5Gpbs/225MHz |
Resolutions(HDTV) |
HDMI SWITCH |
Interlaced(50&60Hz) |
480i,576i,1080i |
Progressive(50&60Hz) |
480p,576p,720p,1080p |
Limited Warranty |
1 Year Parts and Labor |
Operating Temperature |
0℃to +70℃ |
Operating Humidity |
10% to 85 % RH (no condensation) |
Ioutput Cable Length |
60CM |
Storage Temperature |
-10℃to +80℃ |
Storage Humidity |
5% to 90 % RH (no condensation) |
Power Requirement |
No power needed |
Accessories Adapter |
|
User Manual |
English Version |
Hotline:+86 755 33103225
Copyright Information
Copyright © Shenzhen Hdlink Technology Co.. Ltd. 2014-2020. All Rights Reserved.